Translate

Study of the voltage and current of the solar cells using NV6005 Solar cell kit

                                    Experiment-6A

Aim:  Study of the voltage and current of the solar cells

Apparatus:

 NV6005 solar cell kit

Procedure:

1. Take the Solar Energy Trainer NV6005 along with Solar Panel.

2. Place the solar panel in the stand and adjust the panel at an angle of about 45º
With the ground. Direct the sunlight straight at the solar panel (angle of 90º).

Note: If sunlight is not properly available then any source of light like a lamp can
be used.

3. With the DB15 connector connect the Solar Energy Trainer NV6005 with the
Solar Panel. Then wait for 1 minute to avoid errors due to temperature
fluctuations.

4. Measure the voltage (V1) of S1 solar cell by connecting its output across
Voltmeter with the help of patch cords. Similarly, you can measure the voltages
of other solar cells. Record the voltage of all cells (V1, V2, V3, V4, V5, V6)
respectively in the Observation Table.

5. Measure the current (I1) of S1 solar cell by connecting the ammeter across S1
Solar cell with the help of patch cords. Similarly, you can measure the current of
other solar cells. Record the current of all cells (I1, I2, I3, I4, I5, I6) respectively in
the Observation Table.

Observation table:



Comments